|
| |
|
 |
  |
| Intercom |
|
|
 |
|
TALKBACK LOUDSPEAKER STATION
TKS-3 is a remote, 3-channel, selectable
talkback speaker device, with the function
to talk and/or listen on the given channel.
TLS comes with built-in 5W quality speaker
and amplifier to monitor the communication
clearly. LEDs on panel indicate which channel
is selected or unselected to monitor. Receiveonly
provides paging function to existing
intercom system without having to install
separate paging amplifier and speaker.
TLS-3 has a gooseneck-mic socket and feedback
control circuit, giving hands-free full-duplex
comunication without a headset.
Power Input: DC/24-30V; Max. 500mA
Headset Mic Input: 200~600 Ohms, Dynamic
Headphone Output: 200 Ohms ideal
Audio Speaker Output: Max. 5W; 94db SPL at
one meter
Dimension: 11.00 x 26.50 x 17.00 cm
Net/ Gross Weight: 4.0/ 4.5 KG |
The IFP-100 is an active device, used for feeding a signal into
your intercom system from an external source, or for feeding
a signal from your intercom system to another audio device
(or both). The IFP-100 accommodates a wide range of input
and output levels; it contains a studio quality microphone
transformer and accept a signal directly from a good quality,
low impedance, balanced or unbalanced microphone, as well
as line-level signals. In every pack the two systems being
interfaced are transformer isloated from one another, provided
the IFP-100 is used as directed.
Power Input: DC/24-30V
Input: -20db (High); +3db (Low)
Output: +3db/ 600 Ohms balanced
Dimension: 12.50 x 5.00 x 10.50 cm |
 |
SMH-075
Microphone: Dynamic, 200hms
Earphone fq.: 80Hz-110KHz
Sensitivity: 90db
Max. Power: 200mw
Limpedance: 200Ohm
T.H.D.: <2%
Connector: XLR-4pin/ 1.5M |
 |
BSP-1
is portable long-life comfort headset station. The easily
control top panel for switching the microphone on and off,
controlling listing level and signaling. The steel plate belt is
elasticized for comfortable using. Compatible with all
famous popular headset intercom.
Headphone Output: 9-4K Ohms acceptable, 200 Ohms ideal
Microphone Input: 300-600 Ohms, Dynamic
Sidetone Rejection: >50db
Dimension: 93.98 x 109.22 x 63.50 mm |
|
DMH-075
Microphone: Dynamic, 200hms
Earphone fq.: 80Hz-110KHz
Sensitivity: 90db
Max. Power: 200mw
Limpedance: 400Ohm
T.H.D.: <2%
Connector: XLR-4pin/ 1.5M |
 |
 |
DMH-095
Microphone: Dynamic, 200hms
Earphone fq.: 30-10KHz
Sensitivity: 90db
Max. Power: 200mw
Limpedance: 200Ohm
T.H.D.: <3%
Connector: XLR-4pin/ 1.5M |
 |
MPS-60
The MPS-60 is highly regulated 27VDC, 3.8Amp (cont.)
power supply capable of supplying up to 60 BSP-1
beltpacks with all signal lights lit. It may be rack
mounted or used as a talbe-top unit.
Power Required: 90-240V AC, 0.05A (None Load),
1.5A @3.85A DC output 50-60Hz
Power Output: 27V DC +/-0.5V, 0-3.8A
Audio Termination: 200 Ohms unbalanced
Dimension: 4.5 x 48 x 23 cm, 1U High
Weight: 3.5 KG (7.75lbs) |
|
 |
| |
|
|
|
| |